JL/JE Series Manual/Electric High Lift Trucks

Introduction of high lift truck

High lift truck is a new design with larger piston to offer you real 1000kg and 1500kg capacity. This series JL are manual high lift pallet jack and JE are electric high lift truck. It is very suitable as kombinirani ručni paletar i stol za dizanje. Sa ergonomskom toplom ručicom vam je vrlo jednostavno i ugodno za rukovanje. Osim toga, prednje potporne noge i podesivi stabilizatori automatski se podižu na pod s podizanjem vilice, što može osigurati maksimalnu stabilnost i optimalno kočenje. Može zadržati istu brzinu bez obzira na kamion sa ili bez tereta.

This high lift pallet trucks can lift the pallets loading or unloading to the height you need. they can be used in various applications like factory, workshop, warehouse etc.

The manual high lift pallet truck has model: JL5210, JL6810, JL5215, JL6815;

The electric high lift pallet truck has model: JE5210, JE6810, JE5215, JE6815

             Manual high lift pallet truck JL series

We have this item in stock in France, if you are located in Europe, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of manual high lift skid jack truck:

Electric high lift pallet truck JE series

 

• High quality oil cylinder: The integrally sealed hydraulic cylinder can effectively avoid the disadvantages of oil leakage, improve the safety performance of the whole vehicle, lift quickly and improve work efficiency.
• Comfortable handle: Ergonomic design, the outer layer is rubberized and non-slip, the operation feels comfortable, and the drop speed of the hand-pulled pressure relief heavy cargo is controllable, which improves the operation safety.
• Exquisite workmanship: The surface of the car body has been subjected to high temperature baking paint, electrostatic spraying, the surface is smooth and smooth, durable, beautiful and corrosion-resistant.
• Anti-pinch scissors: The scissors are designed with increased spacing and anti-clamping to prevent accidental clamping of other items. Thickened steel enhances the bearing capacity, making it safer and more durable.

• Izuzetno easy.to pumpa i svjetlost čine ovaj uređaj vrlo prikladnim kao kombinirani ručni paletar i stol za dizanje
• Automatska kontrola brzine spuštanja pomoću jedinstvenog hidrauličkog ventila, brzina usporavanja uvijek ostaje ista bez obzira na kamion sa ili bez tereta. To će spriječiti da se oštećenja tereta brzo spuštaju.
• Izuzetna konstrukcija: čelični okvir vilice od 4 mm i veći klip za podizanje osiguravaju postizanje nazivnog kapaciteta.
• Vrlo pogodan kao kombinirani ručni paletar i stol za dizanje
• Prednje potporne noge i podesivi stabilizatori automatski se produžuju na pod kada vilice dosegnu visinu od 420 mm, kako bi se osigurala maksimalna stabilnost i optimalno kočenje.
• Odgovara EN1757-4.

Pažnja i održavanje:

Ne preopterećivati;
Da li je dozvoljeno koristiti uvjete tla;
Ispravno učitajte robu;
Nosite zaštitne cipele i rukavice pri rukovanju;
Molimo vas da detaljno provjerite rad prije svake upotrebe;
Sklapanje mašine ispravnom tehnikom podizanja;
Don't overlook the potential dangers that may exist during operation.

Proper maintenance will extend the life of the truck.
Check the oil, remove air and lubricate during maintenance.
Check the oil level every six months.
The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times.
Lubricate the movable part with motor oil or oil.
Also pay attention to daily inspection and maintenance.
Inspection of the truck can reduce wear as much as possible.
Special attention should be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position.